News

  • Material requirements for precision machining

    Material requirements for precision machining

    Precision machining, not all materials can be precision machining, some materials are too hard, more than the hardness of the machining parts, it is possible to break the parts, so these materials are not suitable for precision machining, unless they are made of special materials, or laser cuttin...
    Read more
  • What factors will cause workpiece deformation in precision machining

    What factors will cause workpiece deformation in precision machining

    With the rapid development of the society and the upgrading of industrialization, precision machining plays a leading role in the industrialization, which has brought about the improvement of the quality of industrialization. However, it is also bad, for example, it will cause work deformation, s...
    Read more
  • Matters needing attention in the process of precision machining factory

    Matters needing attention in the process of precision machining factory

    1. Precautions for CNC processing   (1) when the workpiece is too high, it should be cut with different lengths of knives in layers. After using a large knife to cut, it should be removed with a small knife.   (2) the flat bottom knife shall be used to process the plane, and the ball kn...
    Read more
  • What kinds of errors are likely to occur in the processing of mechanical spare parts?

    What kinds of errors are likely to occur in the processing of mechanical spare parts?

    Nowadays, with the continuous development of society and the improvement of people’s living standards, we often come into contact with the processing of mechanical parts. Its arrival has brought great convenience to our life. Sometimes, due to the improper methods we use, the processing of ...
    Read more
  • Processing of non-standard parts: what is the surface treatment process of precision parts?

    Processing of non-standard parts: what is the surface treatment process of precision parts?

    Fine parts require high strength and endurance in practical operation. Their operation function and service life are closely related to their appearance function. The improvement of appearance function can not be achieved solely by relying on data, and it is also very uneconomical. However, in pr...
    Read more
  • What is the process benchmark of CNC precision parts processing?

    What is the process benchmark of CNC precision parts processing?

    Parts processing process is a process of directly changing the appearance of raw materials (shape, size, location, performance) to semi-finished parts or finished products. This process is called process flow, which is also the processing technology benchmark of parts. The processing process of p...
    Read more
  • Skills and Tips in Precision Machining

    Skills and Tips in Precision Machining

    With the continuous development of society and the gradual improvement of people’s living standards, we often carry out precision machining around us, so we are familiar with it. We should pay attention to details and skills in precision machining, so that we can get better results. Today, ...
    Read more
  • A Brief Talk on the Processing Standard of Precision Parts

    A Brief Talk on the Processing Standard of Precision Parts

    No matter what we do, we need a standard so that we can do things well, especially when machining precision parts. According to Xiaobian, on the lathe, the shape and size of the blank can be changed by the rotational motion of the workpiece and the linear or curvilinear motion of the cutter, and ...
    Read more
  • What kinds of errors are likely to occur in the processing of mechanical spare parts?

    What kinds of errors are likely to occur in the processing of mechanical spare parts?

    Nowadays, with the continuous development of society, people’s living standard has improved significantly. We often have access to mechanical spare parts processing. Its arrival has brought great convenience to our life. Sometimes, due to the improper methods we use, the processing of mecha...
    Read more
  • What parts can be processed in precision parts processing?

    What parts can be processed in precision parts processing?

    In the processing industry, merchants will process products, but not all things can be processed. We need to know first whether we can do it, then what parts can be processed in precision parts processing? Are there many? 1. Processing of complete sets of spare parts for mechanical equipment and...
    Read more
  • How about the quality of electroplating for precision parts processing

    How about the quality of electroplating for precision parts processing

    In our side, there are many processing factories, their processing range is some spare parts, or some hardware, many people see the benefits, have joined the industry, precision parts processing is one of them, then how about the quality of electroplating processing precision parts processing. 1....
    Read more
  • What is the process benchmark of CNC precision parts processing?

    What is the process benchmark of CNC precision parts processing?

    Parts processing is a process of directly changing the appearance of raw materials (shape, size, location, performance) to semi-finished products or finished products. This process is called process flow, which is also the processing technology benchmark of parts. The processing of precision part...
    Read more
  • How to reduce the noise of precision machine parts?

    How to reduce the noise of precision machine parts?

    When we operate a large machine, the sound of the machine is generally relatively loud, so there will be noise, so that other workers, will also cause some trouble, precision machining is the same, so how to reduce the noise of precision machinery parts processing? What’s the way to deal wi...
    Read more
  • Why do die parts have to be processed now?

    Why do die parts have to be processed now?

    Why do the parts increase so much now, and where are they used more? With the development of the industry, the machinery and equipment is better now, and the number of these parts is increasing constantly. Anyway, now CNC precision parts processing is in precision. It’s demanding because of...
    Read more
  • Have you heard that precision parts processing is still divided into stages?

    Have you heard that precision parts processing is still divided into stages?

    Now electrical appliances have a wide range of applications. What is the application of technology in recent years? With the rapid development of industry, the role of precision processing is still obvious in many aspects. Degaussing is used to eliminate the remanence caused by processing, which ...
    Read more
  • Are there many types of precision machining?

    Are there many types of precision machining?

    Why is it more and more important to work the precision machine tools nowadays? What types of precision machine tools are they divided into? How to distinguish?   1. High-speed and precision CNC lathes, turning centers and compound machine tools with four or more axes linkage. Mainly to meet...
    Read more
  • Have you heard that precision parts processing is still divided into stages?

    Have you heard that precision parts processing is still divided into stages?

    Are electrical appliances widely used nowadays, and how about the usage of technology in recent years? With the development of the industry, the role of precision machining is still obvious in many aspects. Demagnetizer is a device used to eliminate the remanence caused by mechanical processing. ...
    Read more
  • Why is aluminium profile used well in aviation industry?

    Why is aluminium profile used well in aviation industry?

    With the rapid development of aviation industry, higher and higher requirements have been put forward for semi-finished products of industrial aluminium profiles. Especially for high-speed military and civil aircraft, more perfect semi-finished products are required in order to make the structure...
    Read more
  • How to solve the problem of cutting fluid heating in precision metal parts processing?

    How to solve the problem of cutting fluid heating in precision metal parts processing?

    Why are the requirements of the processing industry getting higher and higher now, and the requirements of customers on quality are higher and higher. It will become more and more obvious on quality and function. With the rapid development of the industry, the processing equipment of these precis...
    Read more
  • Are there many types of precision machining?

    Are there many types of precision machining?

    Why is the process of precision machining equipment more and more important now? What are the types of precision machining machines?   1. High-speed precision CNC lathe, turning center, four-axis combined processing machine, mainly applicable to aerospace, aviation, instruments, electronic i...
    Read more
  • What is the processing quality of mechanical spare parts greater than?

    What is the processing quality of mechanical spare parts greater than?

    In the future, with the development of China’s construction machinery industry, supplying users with high performance, high reliability, high mobility, good maintainability and economic equipment has gradually become the goal pursued by manufacturers. Therefore, in order to meet the persona...
    Read more
  • What changes will be made in the construction of the basic unit of machine parts processing?

    What changes will be made in the construction of the basic unit of machine parts processing?

    Machining accessories manufacturers believe that large-scale mechanical processing is very important for the construction of this city, so their workload is very large, the number of processing needed every day is very large, if we choose recyclable raw materials as far as possible when processin...
    Read more
  • How can the processing performance of mechanical spare parts attract customers’attention?

    How can the processing performance of mechanical spare parts attract customers’attention?

    Castability: refers to the technological properties of metals or alloys suitable for casting, mainly including flow properties, filling casting capacity, shrinkage, casting, mechanical parts processing. Welding performance: refers to the characteristics of metal materials that can be welded toget...
    Read more
  • How can the processing performance of mechanical spare parts attract customers’attention?

    How can the processing performance of mechanical spare parts attract customers’attention?

    Castability: refers to the technological properties of metals or alloys suitable for casting, mainly including flow properties, filling casting capacity, shrinkage, casting, mechanical parts processing.   Volume shrinkage during solidification; segregation refers to the heterogeneity of chem...
    Read more
  • Can precision machining be made of any material?

    Can precision machining be made of any material?

    Many people know the meaning of NC machining, but I don’t know what it means. In fact, numerical control machining of aluminum alloy is a method of controlling machine tool movement and processing process by using digital information. Machine tools with NC technology or equipped with NC sys...
    Read more
  • Will CNC processing precision requirements be higher? The thinner the better?

    Will CNC processing precision requirements be higher? The thinner the better?

    With a large diameter milling cutter head, the speed is as high as possible, but the machine tool can not shock, rough milling reserved 0.3-0.5 mm margin for finishing, can be achieved depends on the milling cutter line speed is not enough, the blade is sharp or not. The purpose of large diameter...
    Read more
  • If there is a mistake in the computer gong machine tool, what is the problem?

    If there is a mistake in the computer gong machine tool, what is the problem?

    The price of ordinary milling machine is low, but the efficiency of mass production is low. The processing quality is greatly affected by the technical level of the operators, and the processing consistency is not good. The batch production efficiency of CNC processing is high, the processing con...
    Read more
  • Where does precision parts processing embody high quality?

    Where does precision parts processing embody high quality?

    Now the expansion of the metal industry is still very large, for more and more electronic products. Electronic equipment, or with our social development has a certain relationship, first of all, operators must have rich experience and excellent skills in mechanical processing, mechanical processi...
    Read more
  • Why to say aluminium profile of current industry is used in aviation industry good?

    Why to say aluminium profile of current industry is used in aviation industry good?

    With the rapid development of aviation industry, the industrial aluminum semi-finished products put forward higher requirements, especially in the military and civilian aircraft require the use of more perfect semi-finished products, in order to make the parts structure more reasonable, ensure th...
    Read more
  • What will be the new direction of non-standard parts processing development?

    What will be the new direction of non-standard parts processing development?

    As an important equipment in mechanical processing industry, it has made great progress in variety, performance and function in recent years. There is a high performance machining center specially used for mould processing, which integrates 3d CAD/CAM to ultra-finish the complicated curved surfac...
    Read more
  • Is computer gong processing the same as CNC processing?

    Is computer gong processing the same as CNC processing?

    Computer Gong is a kind of artificial intelligence, which is controlled by computer to complete complex processing. The most complex part of the computer gong is the control system. The three-axis servo motors of the computer sending various instructions to control the machine table cooperate wit...
    Read more
  • Has the processing accuracy of mechanical spare parts been improved?

    Has the processing accuracy of mechanical spare parts been improved?

    Is the processing precision of mechanical spare parts improved, the changes in the industry, the role and effect of these obvious? Following the development of our industry, now some of our metal parts processing is getting better and better, and some cutting work is getting more and more precise...
    Read more
  • If there is a mistake in the computer gong machine tool, what is the problem?

    If there is a mistake in the computer gong machine tool, what is the problem?

    Ordinary milling machine has low price, low batch production efficiency, and the processing quality is greatly affected by the technical level of operators, and the processing consistency is not good. The batch production efficiency of NC machining is high, the processing consistency is good, and...
    Read more
  • Where does precision parts processing embody high quality?

    Where does precision parts processing embody high quality?

    Now the expansion of the metal industry is still very large, for more and more electronic products. Electronic equipment, or with our social development has a certain relationship, first of all, operators must have rich experience and excellent skills in mechanical processing, mechanical processi...
    Read more
  • Which strong non-standard parts processing, how to choose will not make mistakes?

    Which strong non-standard parts processing, how to choose will not make mistakes?

    Non-standard parts processing general customers are asking which company will be good, or which manufacturer is good at work, is not worth my choice, in fact, the choice of the right manufacturer to start from many aspects, the first is credibility, a manufacturer to choose the right, you first n...
    Read more
  • There is no difference in the processing of mechanical spare parts.

    There is no difference in the processing of mechanical spare parts.

    Now machine tool processing, tool processing, manufacturing industry technology continues to improve, in recent years, concerned about the news in this area, we can know that the manufacturing industry every year we can say that the number of very high increase, but not all parts are domestic pro...
    Read more
12 Next > >> Page 1 / 2
WhatsApp Online Chat !