Fine parts require high strength and endurance in practical operation. Their operation function and service life are closely related to their appearance function. The improvement of appearance function can not be achieved solely by relying on data, and it is also very uneconomical. However, in practical processing, it is necessary to make its function reach the standard. At this time, it is necessary to use appearance processing skills. This can often achieve twice the result with half the effort. In recent years, this skill has been rapidly developed. Mold polishing skill is a very important link in the field of die surface treatment, and it is also an important process in the process of workpiece processing. The surface treatment process of fine parts is very important in the process of processing. What are the surface treatment processes of fine parts? Today, let our non-standard parts processing manufacturers to explain for us!
The polishing operation of die surface of fine parts not only receives the influence of technological process and polishing equipment, but also suffers from the influence of mirror degree of part data, which has not been paid enough attention in the current processing, which also shows that polishing itself is affected by information. Although the processing skills of improving the appearance function of fine parts are constantly upgraded, the hardening film accumulation, nitriding and carburizing skills are still the most commonly used skills in the processing of fine parts.
Because nitriding technology can achieve a high level of appearance function, and the process of nitriding technology has a very high degree of harmony with the quenching process of steel in fine parts, and the temperature of nitriding is very low, so after the treatment of nitriding technology, there is no need for intense cooling process, so the deformation of fine parts will be very small, so nitriding technology is also the same. It is one of the earliest skills used to strengthen the appearance function in the fine parts processing, and it is also the most widely used at present.
Post time: Oct-09-2019